sample
をテンプレートにして作成
[
トップ
] [
新規
|
一覧
|
検索
|
最終更新
|
ヘルプ
]
開始行:
[[FrontPage]]
[root@localhost ~]# cat /etc/vsftpd/vsftpd.conf
# Example config file /etc/vsftpd/vsftpd.conf
#
# The default compiled in settings are fairly paranoid. ...
# loosens things up a bit, to make the ftp daemon more u...
# Please see vsftpd.conf.5 for all compiled in defaults.
#
# READ THIS: This example file is NOT an exhaustive list...
# Please read the vsftpd.conf.5 manual page to get a ful...
# capabilities.
#
# Allow anonymous FTP? (Beware - allowed by default if y...
anonymous_enable=NO
#
# Uncomment this to allow local users to log in.
local_enable=YES
#
# Uncomment this to enable any form of FTP write command.
write_enable=YES
#
# Default umask for local users is 077. You may wish to ...
# if your users expect that (022 is used by most other f...
local_umask=022
#
# Uncomment this to allow the anonymous FTP user to uplo...
# has an effect if the above global write enable is acti...
# obviously need to create a directory writable by the F...
#anon_upload_enable=YES
#
# Uncomment this if you want the anonymous FTP user to b...
# new directories.
#anon_mkdir_write_enable=YES
#
# Activate directory messages - messages given to remote...
# go into a certain directory.
dirmessage_enable=YES
#
# The target log file can be vsftpd_log_file or xferlog_...
# This depends on setting xferlog_std_format parameter
xferlog_enable=YES
#
# Make sure PORT transfer connections originate from por...
connect_from_port_20=YES
#
# If you want, you can arrange for uploaded anonymous fi...
# a different user. Note! Using "root" for uploaded file...
# recommended!
#chown_uploads=YES
#chown_username=whoever
#
# The name of log file when xferlog_enable=YES and xferl...
# WARNING - changing this filename affects /etc/logrotat...
xferlog_file=/var/log/vsftpd.log
#
# Switches between logging into vsftpd_log_file and xfer...
# NO writes to vsftpd_log_file, YES to xferlog_file
xferlog_std_format=NO
#
# You may change the default value for timing out an idl...
#idle_session_timeout=600
#
# You may change the default value for timing out a data...
#data_connection_timeout=120
#
# It is recommended that you define on your system a uni...
# ftp server can use as a totally isolated and unprivile...
#nopriv_user=ftpsecure
#
# Enable this and the server will recognise asynchronous...
# recommended for security (the code is non-trivial). No...
# however, may confuse older FTP clients.
#async_abor_enable=YES
#
# By default the server will pretend to allow ASCII mode...
# the request. Turn on the below options to have the ser...
# mangling on files when in ASCII mode.
# Beware that on some FTP servers, ASCII support allows ...
# attack (DoS) via the command "SIZE /big/file" in ASCII...
# predicted this attack and has always been safe, report...
# raw file.
# ASCII mangling is a horrible feature of the protocol.
ascii_upload_enable=YES
ascii_download_enable=YES
#
# You may fully customise the login banner string:
ftpd_banner=Welcome to blah FTP service.
#
# You may specify a file of disallowed anonymous e-mail ...
# useful for combatting certain DoS attacks.
#deny_email_enable=YES
# (default follows)
#banned_email_file=/etc/vsftpd/banned_emails
#
# You may specify an explicit list of local users to chr...
# directory. If chroot_local_user is YES, then this list...
# users to NOT chroot().
chroot_local_user=YES
chroot_list_enable=YES
# (default follows)
chroot_list_file=/etc/vsftpd/chroot_list
#
# You may activate the "-R" option to the builtin ls. Th...
# default to avoid remote users being able to cause exce...
# sites. However, some broken FTP clients such as "ncftp...
# the presence of the "-R" option, so there is a strong ...
#ls_recurse_enable=YES
#
# When "listen" directive is enabled, vsftpd runs in sta...
# listens on IPv4 sockets. This directive cannot be used...
# with the listen_ipv6 directive.
listen=YES
#
# This directive enables listening on IPv6 sockets. To l...
# sockets, you must run two copies of vsftpd whith two c...
# Make sure, that one of the listen options is commented...
#listen_ipv6=YES
pam_service_name=vsftpd
userlist_enable=YES
tcp_wrappers=YES
終了行:
[[FrontPage]]
[root@localhost ~]# cat /etc/vsftpd/vsftpd.conf
# Example config file /etc/vsftpd/vsftpd.conf
#
# The default compiled in settings are fairly paranoid. ...
# loosens things up a bit, to make the ftp daemon more u...
# Please see vsftpd.conf.5 for all compiled in defaults.
#
# READ THIS: This example file is NOT an exhaustive list...
# Please read the vsftpd.conf.5 manual page to get a ful...
# capabilities.
#
# Allow anonymous FTP? (Beware - allowed by default if y...
anonymous_enable=NO
#
# Uncomment this to allow local users to log in.
local_enable=YES
#
# Uncomment this to enable any form of FTP write command.
write_enable=YES
#
# Default umask for local users is 077. You may wish to ...
# if your users expect that (022 is used by most other f...
local_umask=022
#
# Uncomment this to allow the anonymous FTP user to uplo...
# has an effect if the above global write enable is acti...
# obviously need to create a directory writable by the F...
#anon_upload_enable=YES
#
# Uncomment this if you want the anonymous FTP user to b...
# new directories.
#anon_mkdir_write_enable=YES
#
# Activate directory messages - messages given to remote...
# go into a certain directory.
dirmessage_enable=YES
#
# The target log file can be vsftpd_log_file or xferlog_...
# This depends on setting xferlog_std_format parameter
xferlog_enable=YES
#
# Make sure PORT transfer connections originate from por...
connect_from_port_20=YES
#
# If you want, you can arrange for uploaded anonymous fi...
# a different user. Note! Using "root" for uploaded file...
# recommended!
#chown_uploads=YES
#chown_username=whoever
#
# The name of log file when xferlog_enable=YES and xferl...
# WARNING - changing this filename affects /etc/logrotat...
xferlog_file=/var/log/vsftpd.log
#
# Switches between logging into vsftpd_log_file and xfer...
# NO writes to vsftpd_log_file, YES to xferlog_file
xferlog_std_format=NO
#
# You may change the default value for timing out an idl...
#idle_session_timeout=600
#
# You may change the default value for timing out a data...
#data_connection_timeout=120
#
# It is recommended that you define on your system a uni...
# ftp server can use as a totally isolated and unprivile...
#nopriv_user=ftpsecure
#
# Enable this and the server will recognise asynchronous...
# recommended for security (the code is non-trivial). No...
# however, may confuse older FTP clients.
#async_abor_enable=YES
#
# By default the server will pretend to allow ASCII mode...
# the request. Turn on the below options to have the ser...
# mangling on files when in ASCII mode.
# Beware that on some FTP servers, ASCII support allows ...
# attack (DoS) via the command "SIZE /big/file" in ASCII...
# predicted this attack and has always been safe, report...
# raw file.
# ASCII mangling is a horrible feature of the protocol.
ascii_upload_enable=YES
ascii_download_enable=YES
#
# You may fully customise the login banner string:
ftpd_banner=Welcome to blah FTP service.
#
# You may specify a file of disallowed anonymous e-mail ...
# useful for combatting certain DoS attacks.
#deny_email_enable=YES
# (default follows)
#banned_email_file=/etc/vsftpd/banned_emails
#
# You may specify an explicit list of local users to chr...
# directory. If chroot_local_user is YES, then this list...
# users to NOT chroot().
chroot_local_user=YES
chroot_list_enable=YES
# (default follows)
chroot_list_file=/etc/vsftpd/chroot_list
#
# You may activate the "-R" option to the builtin ls. Th...
# default to avoid remote users being able to cause exce...
# sites. However, some broken FTP clients such as "ncftp...
# the presence of the "-R" option, so there is a strong ...
#ls_recurse_enable=YES
#
# When "listen" directive is enabled, vsftpd runs in sta...
# listens on IPv4 sockets. This directive cannot be used...
# with the listen_ipv6 directive.
listen=YES
#
# This directive enables listening on IPv6 sockets. To l...
# sockets, you must run two copies of vsftpd whith two c...
# Make sure, that one of the listen options is commented...
#listen_ipv6=YES
pam_service_name=vsftpd
userlist_enable=YES
tcp_wrappers=YES
ページ名:
![[PukiWiki]](image/pukiwiki.png "[PukiWiki]")
